In an age where smart phones are nearly as powerful as desktop computers, companies are racing to make every possible product connected, and wearable technology is all the rage, it made sense that someone would realize the market for connected, wearable slave control technology. Introduced this year during CES 2016, though not at the show since they would not allow fetish products, the Inforcer One.
Yes, there are remote control buttplugs, remote shock collars, and other such BDSM gear, but nothing has approached the complexity and ingenuity of the Inforcer One.
The device comes with various component options. The main piece is a locking collar, on the thicker side to accommodate the technology inside and sufficient batter power to run for several days, but once attached quite secure. Features include:
Wifi, LTE, and Bluetooth connectivity. This allows easy programming of the various settings and options through a website or through the available Android and iPhone apps, and constant connectivity, which ensures full control over the slave property.
Remote shock capabilities. The included batteries, designed to last for several days of use, allow for shocks to administer punishment to the slave. With levels 1-10, the shock levels are fully customizable. WARNING: A level 10 shock will knock the slave to the ground and leave him unable to move for several minutes (much like a TASER), and may knock some slaves unconscious. (Note: Regular use does decrease battery life, so careful monitoring of the battery condition is recommended. Text and email alerts can be sent to the Owner when battery levels reach 20%.
GPS monitoring. See where your slave is at any time. Simply pull up the location map online, or on the app, and know precisely where your valuable property is located.
GPS-enabled Geofencing technology. With a simple GPS chip and the previously mentioned shock technology, a Master can easily establish a perimeter for where his slave is allowed to go before a shock kicks in. They can limit the slave to as small a radius as 5 feet, so the slave could easily be left naked and simply wearing the Inforcer One collar at any location, be it the back yard or a remote forest, and the slave would be unable to leave without increasingly severe shocks. Or, the Owner could set the boundaries as the boundaries of his house, or his yard, or even his town or his state, and go to work secure in the knowledge that his slave will not be going anywhere he is not allowed. The initial shock is relatively mild, just a short warning that the slave should remain where he is. The following shocks increase in severity until the slave ceases attempting to leave the allowed location. This will be of enormous value to Masters trying to ensure the safe, humane captivity of the human slave.
Comprehensive health monitoring. Sensors located directly on the slave's skin exposed to the collar monitor a full range of health information on the slave, including body mass index (BMI), blood sugar, heart rate, steps, distance traveled, estimated weight, a full fitness tracker (think FitBit in a collar), and much more. In a revolutionary forward thinking achievement, the system recognizes if the slave is in physical distress and can summon emergency services and alert the Owner, allowing an Owner peace of mind in leaving his slave restrained or geofenced. The system automatically uploads the health information to the cloud, allowing for easy tracking of a slave's progress and ensuring the slave meets fitness goals the Owner sets.
Fire and CO2 sensing technology. Similar to what is found in most modern smoke detectors, the Inforcer One collar can sense smoke, and CO2, and can release location restrictions in the event of a fire or CO2 emergency, giving Owners even more peace of mind. The geofencing technology allows the Owner to set a path, for example, out of the house and to a secure place in the back yard, for the slave to safely exit the home in the unlikely event of an emergency.
Two way cellular communications. Pressing a button on the side of the collar allows the slave to place a one way call to his Owner, allowing contact for routine things, or in an emergency situation, as directed by his Owner. The program is hardwired to call only the Owner, so there is no risk of the slave contacting individuals he is not allowed to contact. Of course, the Owner can also use the app to call the slave to give directions as needed. When wifi is available, the calls happen seamlessly over VOIP, saving phone minutes for times when wifi is not available.
Integrated speaker, microphone, and vocal cord sensors. The microphone and speaker allow for the previously mentioned cellular communications, but can be used for so much more. First, the system allows for automated voice commands to the slave, so the Master can determine when and what his slave does easily. For example, at 4:00pm, the collar can announce to the slave that it is time to begin preparing dinner, and at 5:15pm it can tell the slave that the Owner is on his way home (using GPS data from the Owner's cell phone) and that he should kneel and wait patiently by the front door. The possibilities of verbal orders are virtually limitless. Additionally, the microphone monitors a slave's speaking and can be programmed to shock the slave if he speaks, assuming the Owner wants a silent slave. A sensor on the collar also monitors the vocal cords directly, adding security to ensure total control over the slave's voice. Additionally, the Owner may choose to allow the slave to listen to streaming music through the collar while he works, or may emit white noise while the slave sleeps, among other functions.
Integrated high def camera. Ever wonder if your valuable property is doing what he has been instructed to do? The Inforcer comes with a high definition camera on its front side, which allows an Owner to view what his slave is viewing at any time through a web browser or phone app. You might wonder how you ensure that the camera stays correctly positioned, but worry not! The designers have considered this, and the motion sensors detect if the camera is not facing forward, and alert the slave through the speakers to adjust, then gently encourage him to change it with an electric shock as necessary.
Alarm clock function. Want your slave awake at 5am while you sleep to 8am? No worries with the Inforcer One! The slave can be easily awakened through the integrated speakers, or by a few gentle (or not so gentle) shocks to the slave's neck (and other body parts, as you will learn ahead). Your slave will be up and ready to serve at the time you choose.
Slava, the VoicePrint Digital Assistant (BETA). The VoicePrint Assistant, still in Beta, recognizes the Owner's voice and slave's voice, and through Siri-like technology, understands commands from the Owner and implements them on the Inforcer One. So, an Owner can simply say, "Slava, geofence the slave to a radius of 10 feet from his current location." The system will confirm that the command was received and processed, and the slave will be unable to move more than 10 feet from his current GPS location without a shock. Or, the Owner can say, "Slava, shock level 5, 10 second burst" to give the slave a 10 second shock at medium settings. This could be used for simple punishment, or in an emergency should the slave lash out at the Owner. In addition to speaking commands to the collar itself, the Owner can also use the voice button to issue commands through the connected apps. Voice command options are detailed in the online documentation, and additional functions are expected soon. This is designed to make programming and using the collar easy, with little need to use the app when making a change.
Maglock restraining and charging functions. The collar (and components) feature one or more maglock connectors, which allow them to connect to the other components of the system by simply placing them together and activating the maglock. With items that are connected to a power source, such as the SmartCharge board, they will charge while connected to the maglock as well.
Long-lasting Battery Life. The somewhat sizable collar (and component units) are large enough to accommodate a relatively large battery. Under normal conditions, the Inforcer One is expected to last approximately 5-7 days before needing to be recharged. However, the company does recommend charging every 3 days as a precaution in the first weeks of use as the Owner learns the system and gets it set to his slave's routines.
Third party connected apps and devices. The device software will be updated in the coming months to allow third party connected apps and devices. The developers of the Inforcer One say they are excited to see what options the developer community bring to the table to supplement the already impressive product. One third party developer is already looking into a connected cock gag, while another is planning a connected slave cage.
Waterproof to 20 meters. This will be a welcome relief to Owners who want their slaves to bathe or shower daily. WARNING: The weight of the Inforcer One and its components make swimming nearly impossible Ð the waterproofing is not designed with swimming in mind, and is hazardous to the slave's health. All components will automatically unlock if the system senses the slave is below water and drowning.
Quality & Reliability. These devices are made of high quality stainless steel and are designed for constant use with relative comfort for what should be many years. Each device comes with a 5 year manufacturers warranty.
As if this list of features is not enough to have every Owner Ð and most slaves Ð hard and dripping, the device also offers multiple attachments to make slave ownership and control even easier:
Connected Wrist Cuffs with locking functionality. An exciting accessory item, the connected wrist cuffs come with a range of features mirroring and expanding the above. They connect to the Inforcer One collar control system through Bluetooth, and have the ability to also emit shocks, lock and unlock remotely, sense motion, and detect when they come near other parts of the system. Some possible uses are for simple restraint, as the two will snap and lock together magnetically when told to do so via the app or voice command, or using a unique integrated pop out ring to attach them to a chain or other secure point. The electric shock can be controlled much like the collar's own shock system, and can be used in conjunction with it or separately. For example, an Owner might not want his slave to touch his collar and program the wrist cuffs to emit a shock when they come within 5 or 8 inches of the collar. With the locking mechanism, you can easily attach the wrist cuff to the collar, the ball collar, the ankle cuff, the SmartCharge Bondage Board, or a SmartLock Connector. With motion sensing and proximity detection to the collar, the wrist cuffs are able to recognize a variety of movements, such as walking, running, push ups, jumping jacks, and more. This makes it very easy for the Owner to program a series of exercises for the slave, and ensure they are done properly and completely, as the system will shock the slave if not. Excellent for the Owner trying to keep his slave slim and trim, or muscular and buff. The wrist cuff can be sized to fit most slave wrists.
Connected Ankle Cuffs with locking functionality. Functionality is virtually identical to that of the wrist cuffs, but larger in size to accommodate ankles. For some smaller slaves, wrist cuffs might be used on the ankles instead, and the system can be programmed to understand they are being used as ankle cuffs.
Connected Ball Collar/Cock Ring and Buttplug (also with locking functionalities). Designed to be used as either a ball collar or cock ring with a corded attached buttplug, the device contains many of the same features as the wrist and ankle cuffs, with the notable differences of being designed to attach to balls or around the cock and balls, and of the attached (but detachable) buttplug. The ball collar can also emit a shock to the slave's genitals for punishment or a variety of other reasons, and the proximity sensors will recognize the wrist cuffs coming too close for too long (say 60 seconds to allow for cleaning and urination) and shock the slave to prevent him from masturbating. Perfect for the naughty slave who can't be trusted to not touch himself. The device is also designed to sense an erection and can be programmed to emit shocks to negate the erection and ensure slaves stay flaccid, if their Owner prefers. The connected buttplug, which can be detached by the Owner only, can sense whether it is inserted, allowing the Owner to determine how much time the slave must wear the plug and how much time it may be removed. Some Owners might only allow for the occasional 10 minute period for cleaning or a bowel movement, while others might only require the slave to plug himself a few hours a day. When allowed outside of the rectum, the plug can attach to the locking mechanism on the ball collar, so it stays out of the way. Naturally, the buttplug can also emit electric shocks as programmed by the Owner. The owner may detach the buttplug and use the ball collar by itself, but the buttplug cannot be used separately as the circuits for the system are contained in the ball collar. While the ball collar is designed to be used as a cock ring, it is not a recommended function as it tends to cause erections in slaves, while being attached as a ball collar allows for chastity control and other functions, but does not cause erections. This system is a welcome update to chastity devices for most slaves and many Masters, as it reduces the chafing and discomfort of having an entire device locked around the cock and balls, while increasing security with multiple sensors to detect masturbation, erections, and ejaculation. The Owner can be notified on his phone if the slave activates the chastity punishment system, becomes erect, or ejaculates.
A SmartCharge Bondage Board with locking functionality. While a significant extra expense, you will soon understand why this is a must have item in the system package. Each Inforcer One component comes with a small charger (similar to an iPhone charging base and cable), but as you might imagine, connecting the total 6 devices to 6 separate charging cords is not optimal, and would often require the Owner to remove the devices from their slave. The designers of the Inforcer One envisioned this problem, and created this unique 7 foot by 3 foot (by .3 inch) board to help the Owners ensure total captivity of their valuable human property. The board has an outline of the human form, with multiple maglock connectors at locations for the collar, wrist and ankle cuffs, and of course the ball collar. When it is time to charge the devices, the slave only has to go to the board, which can be located in a closet or the dungeon, or other out of the way space, lay down on the board in the outline, fit each piece into the maglock chargers, and the system will automatically lock each item to the board and begin charging. Then the slave may lay on the board and relax for a short 3-6 hours while the components recharge. (Note: The slave must attach the ball collar first, as it uses a small cord given the positioning of the balls several inches away from the board itself; all other parts can attach to the flat, imbedded maglock chargers.) In addition to allowing the Inforcer to be worn at all times, the enormous benefit to the board is the ability to program a designated time for charging, the system prompting the slave that it is time to charge and "encouraging" them if necessary, then of course automatically securing the slave to the board while the system does the hard work of charging. Slaves that have tested the board say that it is relatively comfortable for the 3-6 hour charging period. (Comfortable relative to slave life, at least.) If you choose to purchase the collar and wrist and ankle cuffs, you will definitely want the SmartCharge Board to make charging all those items nearly effortless (at least for the Owner). While most Owners may have the slave sleep overnight while the system charges, some wish to have charging done while the slave is awake, and the designers of the system were kind enough to include sleep monitoring abilities, and of course to allow the Owner to program electric shocks or an alarm from the speakers to ensure that the slave does not accidentally fall asleep when the system detects sleep.
SmartLock Connectors, with obvious locking functionality. The SmartLock Connectors are going to be necessary for nearly any user of any part of the device. They are relatively simple items Ð they simple incorporate a maglock connector, and have rings for you to attach to other points. Example uses would be to attach them to a St. Andrews Cross where the Owner wants the slave to wait until he arrives home. After the slave finishes his chores, or at a specified time, he would go to the cross and the SmartLock connector would automatically maglock his wrist cuffs to the connector, and the slave would remain there securely until his owner arrived home. Or, the Owner could attach a SmartLock connector to a chain in the basement wall and connect it to the collar, ball collar, wrist or ankle cuffs, and keep the slave secured there until he released the lock, or a time specified in the system. This is an excellent way to restrict the slave to certain portions of the home, as geofencing cannot operate effectively inside a home with the lower GPS signals. The possibilities for using the SmartLock connectors to secure the slave in various places and ways is virtually limitless.
As you might imagine, this level of technology does not come at a very cheap price. The base cost of the Inforcer One collar unit is $1500. The additional components are priced at:
Wrist Cuffs (set of 2): $350
Ankle Cuffs (set of 2): $400
Ball Collar / Cock Ring and Buttplug: $250
SmartCharge Bondage Board: $400
SmartLock Connectors: $150 each
So the entire system can be purchased for around $3,050 plus tax, which when considering an investment in a permanent piece of valuable human property, many Owners will agree that it is worth the cost.
There is a $10 monthly service charge for use of the apps and website to program the Inforcer One. A separate cellular contract must be purchased if the Owner wants to use the cellular voice and data features, and since the device uses minimal data the cost is an affordable $25 per month through AT&T. The annual cost of the service and cellular plans come out to approximately $420 per year, or around $500 with taxes and fees.
The system is so well designed that it seems destined for the neck, wrists, ankles, cocks/balls, and asses of slaves around the world. Such a wonderful new way to provide total security and captivity in a humane and simple way for your valuable human property.
Unfortunately, this doesn't really exist, but the technology for virtually all of it does exist right now (in 2016). Maybe someone will get to work on it!